Æ-6 eLena; Conceptual Design of 6-Seater Electric Aircraft
Abstract
Globalization has made a huge impact on worldwide interaction and integration in our lives. Traveling between locations, for instance, has become easier with the advancement of transportation modes such as aircraft. However due to the ever-increasing environmental concerns, alternatives of conventional aviation fuels have become necessary in order to provide more eco-friendly flights. Fortunately, alternatives such as aircraft batteries have become feasible with technology improvements, allowing an idea for resolving the issue, namely the development of an electric aircraft. This paper will be focused on designing a six-seater electric aircraft through parametric studies on several aspects such as aircraft configurations, weight and balance, stability, performance, structures, aerodynamics, and cost analysis while also aiming to meeting the given DRO. The designed aircraft, Æ-6 eLena, has a range of 540 km, a takeoff weight of 3003 kg, a cruising speed of 300 km/hr, and a lift-to-drag ratio of 13.5. The conceptual design of this aircraft is intended to be certified under current CASR 23 regulations, with production beginning in 2026.
Keywords
Full Text:
7 - 21 | PDFReferences
Avanzini, G., & Giulietti, F. (2013). Maximum Range for Battery-Powered Aircraft. Journal of Aircraft, 50(1), 304–307. https://doi.org/10.2514/1.c031748
Direktorat Jenderal Perhubungan Udara. (2014, September). CASR Part 23 AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES.
Gudmundsson, S. (2021). General Aviation Aircraft Design: Applied Methods and Procedures (2nd ed.). Butterworth-Heinemann.
Hartzell Propeller, Inc. “Going electric: what are the potential benefits of electric aircraft?” https://hartzellprop.com/going-electric-the-benefits-of-electric-aircraft/
Nicolai, L. M., & Carichner, G. E. (2010). Fundamentals of Aircraft and Airship Design, Volume 1 – Aircraft Design. Reston, Va.: American Institute of Aeronautics and Astronautics.
Raymer, D. P. (2018). Aircraft Design: A Conceptual Approach (Aiaa Education) (AIAA Education Series) (6th ed.). American Institute of Aeronautics & Ast.
Roskam, J. (2002). Airplane Design Part VIII: Airplane Cost Estimation Design Development and Manufacturing and Operating. Design, Analysis and Research Corporation (DARcorporation).
Roskam, J. (2015). Airplane Design Part I: Preliminary Sizing of Airplanes. Design, Analysis and Research Corporation (DARcorporation).
Roskam, J. (2017a). Airplane Design Part II: Preliminary Configuration Design and Integration of the Propulsion System. Design, Analysis and Research Corporation (DARcorporation).
Roskam, J. (2017b). Airplane Design Part III: Layout Design of Cockpit, Fuselage, Wing and Empennage: Cutaways and Inboard Profiles (Volume 3) (Revised ed.). Design, Analysis and Research Corporation (DARcorporation).
Ruijgrok, G. (2009). Elements of airplane performance (2nd ed.). VSSD.
Sadraey, M. H. (2012). Aircraft Design: A Systems Engineering Approach (1st ed.). Wiley.
Tim Bowler. “Why the age of electric flight is finally upon us.” https://www.bbc.com/news/business-48630656
Torenbeek, E. (1982). Synthesis of Subsonic Airplane Design: An introduction to the preliminary design of subsonic general aviation and transport aircraft, with emphasis on . . . design, propulsion and performance (1982nd ed.). Springer.
DOI: https://doi.org/10.47355/avia.v6i1.95
Refbacks
- There are currently no refbacks.
AVIA is licensed under a Creative Commons Attribution 4.0 International License.
AVIA Statcounter :
View My Stats
AVIA Flag Counter :
AVIA on MAP :